Fiber laser welding of Ti–6Al–4V to Inconel 718 bimetallic structure via Cu/Ta multi-interlayer

Abstract

In current work, we have used fiber laser welding (FLW) technology to manufacturing the Ti–6Al–4V (TC4) and Inconel 718 (IN718) bimetallic structure and to prevent the formation of brittle phases via Cu/Ta multi-interlayer. The results of this study showed that Cu/Ta multi-interlayer was very effective in preventing the formation of continuous brittle intermetallic layers of Ti–Ni and Ti–Cu. The good metallurgical bonds were presented at these interfaces between TC4 and IN718. As a result, the joints with gradational structure, i.e. TC4| (α+β Ti, Ta)ss| (β Ti, Ta)ss| Ta(s, s)+ (Cu(s, s)+ Ta(s, s)+ Ti3Ni4)| Cu(s, s)+ (Cu(s, s)+ Ta(s, s))| Ni(Ta, Fe, Cr)ss| IN718 can be formed, which can contribute high tensile strength of joints with the value of 396 MPa.