Abstract

The ferroelectric Bi3.25La0.75Ti3O12 (BLT) thin film and HfO2 layer were fabricated using both metal-organic decomposition and atomic-layer deposition methods. The HfO2 thin film was deposited as a buffer layer between Si substrate and BLT thin films. The electrical and structural properties of the metal-ferroelectric-insulator-semiconductor (MFIS) structure were investigated by varying the HfO2 layer thickness. Transmission electron microscopy showed no interdiffusion and reaction occurring when the HfO2 film is used as a buffer layer. The width of the memory window in the capacitance-voltage curves for the MFIS structure was decreased with increasing thickness of the HfO2 buffer layer. The experimental results showed that the BLT-based MFIS structure is suitable for nonvolatile-memory field-effect transistors with a large memory window.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.