Abstract
Lead-free, piezoelectric thick films of 0.948(K0.5Na0.5)NbO3–0.052LiSbO3 were fabricated by aerosol deposition and the effect of postannealing temperature on the dielectric, ferroelectric, and piezoelectric properties was investigated. The thickness of the films ranged from 5to17μm and highly dense films were obtained after deposition at room temperature. With increasing annealing temperature, the dielectric and ferroelectric properties were markedly increased. The maximum ferroelectric and dielectric properties of ε3T∕ε0=1012, Pr=15.5μC∕cm2, and d33=50pm∕V were obtained after annealing at 800°C for 1h. Above this temperature, the film exhibited rapid property degradation as it was decomposed due to Na2O evaporation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
