Abstract
Ferrite morphologies and carbide precipitate dispersions in a ½Cr-Mo-V creep-resisting steel have been studied after isothermal transformation at a number of subcritical temperatures in the ferrite and bainite ranges, and also after rapid quenching to room temperature to produce martensite. It has been found that VC precipitates by the interphase mechanism during direct transformation to ferrite, and towards the latter stages of the transformation, some fibres of Mo2C also form. Bainite morphologies ranged from granular at the higher transformation temperatures to lath-like at lower temperatures. Tempering of bainite and martensite at 700°C resulted in VC precipitation on dislocations and the interparticle spacing tended to decrease as the initial transformation temperature in the bainite range was increased. However, the best resistance to overageing during tempering was provided by ferrite produced by direct transformation at 700°C. These differences in dispersion stability are explained in terms of the varying dislocation densities and the numbers of interfaces in the structures.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
