Abstract
A photoconductive detector (PCD) responding only to vacuum ultraviolet (VUV) radiations below 180 nm without any filter was fabricated using an yttrium fluoride (YF3) thin film grown by femtosecond (fs) laser pulsed laser deposition (PLD). The structural morphology (particle size and surface roughness) of the thin film was improved using a low laser fluence and a high substrate temperature during the fabrication. The smallest average particle size achieved was 159 nm with a roughness of 37 nm at a laser fluence of 13.5 J cm−2 and a substrate temperature of 400 °C. The resistances for the dark current of the PCD increased from 10 TΩ to 680 TΩ using YF3 thin films with a smaller average nanoparticle diameter of 159 nm rather than 330 nm. The time response of the PCD to a VUV flash lamp emitting at 170 nm showed that a small average nanoparticle diameter results to a fast response time. By covering the Al electrode pairs with another fs PLD-grown YF3 film, the influence of external photoelectric effect was suppressed and the response wavelength edge decreased from 280 nm to 180 nm without any filter. The filterless PCD is expected to enhance the use of fluoride thin films in conjunction with VUV light sources for various scientific and industrial applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.