FDM 3D 프린터 베드 위치에 따른 ABS 시편 색상 차이에 관한 연구

Abstract

FDM 3D Printer is used in maker space for mass production by the maker. Makers desire to manufacture products in a variety of colors using ABS Filaments. The purpose of this study is to identify the relation between the color of resin and each position on the bed. So, when printed using the 3D Printer, we found out the difference in the colors that it appears depending on the position of the bed. To see the difference in color, basic, blue, yellow, white, and black were selected and the bed plate was divided into three sections. Specimens were measured to obtain delta E values between each sections by the chromatic differential system. Obtained delta values were analyzed by the NBS system. As a result, the delta E value of black was found to correspond to “Appreciable”. In most cases, delta E values between the middle and the outer or the inner and the outer was greater than values between the middle and the inner. Using Infrared Thermal Camera, We found that the color difference relates 3D printing positions and temperatures. As a result, the 3D printing bed positions should be considered when 3D printing mass production.