FDEM analysis of deep rock mass failure and its impact on horizontal bearing capacity in offshore wind turbine piles

Abstract

Rock-socketed single piles are integral components of offshore wind turbine foundations in rock-based sea areas. Traditional numerical models have been employed to analyze the failure modes and lateral interactions between piles and the rock medium. However, these do not simulate the decline in the horizontal bearing capacity due to rock breakage, posing potential safety risks. In this study, the combined finite-discrete element method (FDEM) was used to simulate the deformation process of submarine rock masses transitioning from an intact to a fractured state. A notable innovation in the proposed approach is the consideration of the effects of the rock mass fracture and pile-rock cohesion on the load-bearing behavior of single-pile foundations. The FDEM model was validated through full-scale lateral load tests. The results showed a distinctive sequence in failure mechanisms, with the tensile failure of the rock mass around the pile at significant depths preceding the compression failure. Local failure at the contact interface significantly reduced the horizontal bearing capacity—a phenomenon that is inadequately represented by conventional finite element models. Furthermore, the cohesion element embedding method was introduced and used to simulate the influence of the tensile properties inherent in grouting materials on the failure strength and mode of the pile-rock interface. This study highlighted the importance of considering the nuanced effects of rock failure in the design of horizontally loaded piles. Failure to do so could lead to nonconservative designs and compromise the safety and efficacy of offshore wind turbine foundations. By pushing the boundaries of numerical modeling with the FDEM, the study aims to provide a more accurate and reliable framework for the design and assessment of rock-socketed single piles for offshore wind energy applications.