Fatigue damage evolution using NDT techniques for Health Monitoring of CFRP laminates

Abstract

In this work, an experimental method based on ultrasonic measurements with piezoelectric transducers (PZTs) was proposed for monitoring the evolution of fatigue damage on a batch of carbon fabric Open Hole specimens. The amplitudes of the recorded ultrasonic sinusoidal waves in packets were evaluated with pitch-catch modality during the different phases of the fatigue life and correlated to the applied loads.The examination of the ultrasonic data showed high sensitivity of the UT signal respect to stiffness decay and to fatigue damage associated with delamination near the hole. Occasional ultrasound measurements with the consolidated pulse-echo Phased Array technique were carried out by the authors at regular time intervals during the tests to evaluate the state of damage in relation to the degradation of the signal detected with the PZT sensors.The results have shown the potential capability of the applied experimental technique for real-time detection of delamination on composite elements subjected to time-varying loads.