Fatigue behavior of an advanced SiC/SiC ceramic composite with a self-healing matrix at 1300 °C in air and in steam

Abstract

The fatigue behavior of a non-oxide ceramic composite with a multilayered matrix was investigated at 1300°C in laboratory air and in steam environment. The composite was produced via chemical vapor infiltration (CVI). The composite had an oxidation inhibited matrix, which consisted of alternating layers of silicon carbide and boron carbide and was reinforced with laminated woven Hi-Nicalon™ fibers. Fiber preforms had pyrolytic carbon fiber coating with boron carbon overlay applied. Tensile stress-strain behavior and tensile properties were evaluated at 1300°C. Tension-tension fatigue behavior was studied for fatigue stresses ranging from 70 to 160MPa in air and in steam. The fatigue limit (based on a run-out condition of 2×105 cycles) was between 80 and 100MPa. Presence of steam had little influence on fatigue performance. The retained properties of all specimens that achieved fatigue run-out were characterized. Composite microstructure, as well as damage and failure mechanisms were investigated.