Abstract

We present two implementations of fast, discrete incoherent optical frequency-domain reflectometers (I-OFDR) for the interrogation of equally spaced fiber Bragg grating (FBG) arrays, based on the determination of the array's radio frequency (RF) response at a sparse number of frequencies. FBG reflectivities are determined by use of the inverse discrete Fourier transform (IDFT) of the sparse RF response, in a dynamic range limited by crosstalk induced by FBG positioning errors. The first implementation employs the complete, vector RF response at a number of frequencies equal to the number ${N}$ of FBGs in the array. In the second, the introduction of a reference reflector allows for an interrogation using the power (phaseless) RF response in ${4N-1}$ frequencies. Demodulation based on IDFT leads to total interrogation times determined by the network analyzer scan time, which can be as low as 10 ${\mu }$ s per FBG. Depending on the interrogation technique, electrical bandwidth requirements are 1–2 GHz in our array with 10-cm separation. We implemented both techniques in a ${N=10}$ array, inducing decays in reflectivity by 10 dB in one or several FBGs. Unambiguous detection of FBG decays was obtained in both interrogation methods. Additional tests performed on the measured reflectivities also show that measurement linearity is preserved in the 10-dB decay range. As discrete I-OFDR systems, the proposed techniques show the possibility to reach compromises between interrogation time and dynamic range or accuracy in reflectivity measurements, using the number of interrogation frequencies and the sensor topology.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call