Abstract
A new method for the fast direct chromatographic determination of strontium in seawater has been developed. Two coupled silica monolithic columns (total dimensions 200×4.6mm I.D.) chemically modified with iminodiacetic acid (IDA) functional groups were used for baseline separation of all alkaline-earth metals in seawater in less than 4min at flow rate of 4.0mLmin−1, using an eluent containing 0.25M sodium chloride and 2mM glycolic acid, pH 5.11. Several colour-forming ligands, including o-cresolphthalein complexone (o-CPC), methylthymol blue (MTB), xylenol orange (XO), 4-(2-pyridylazo)resorcinol (PAR) and ZnEDTA–PAR were evaluated as reagents for post-column reaction (PCR) based spectrophotometric detection. Sensitivity of the developed method for strontium was at the low mgL−1 level in undiluted seawater samples, in the presence of excessive amounts of calcium and magnesium, using post-column reaction detection with o-CPC at 570nm. The method allowed quantitative determination of strontium in seawater samples (LOD 3.23±0.15mgL−1, sr=4.6%), with direct injection of just 4μL of seawater onto the chromatographic column.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
