Fast bidirectional vector wave propagation method showcased on targeted noise reduction in imaging fiber bundles using 3D-printed micro optics.

Abstract

In order to extend simulation capabilities for reflective and catadioptric 3D-printed micro optics, we present a fast bidirectional vector wave propagation method (BWPM). Contrary to established fast simulation methods like the wave propagation method (WPM), the BWPM allows for the additional consideration of reflected and backwards propagating electric fields. We study the convergence of the BWPM and investigate relevant simulation examples. Especially, the BWPM is used for evaluation of 3D-printed index matching caps (IMCs) in order to suppress back reflected light in imaging fibers, used for keyhole access endoscopy. Simulations studying the viability of IMCs are followed up with experimental investigations. We demonstrate that 3D-printed IMCs can be used to suppress noise caused by back reflected light, that otherwise would prohibit the use of imaging fibers in an epi-illumination configuration.