Abstract
Falling film evaporators are commonly employed in a wide range of industrial applications, with a particular emphasis on the management of vapor generated during operations. It is widely recognized that vapor streams have a significant influence on falling film flow and heat transfer. In this paper, we conducted numerical investigations of this issue in the presence of vertical vapor streams and validated the present numerical results against previous experimental data. The results indicate that the length of the liquid tongues and the interaction time between two liquid films are affected by both downward and upward vapor streams. The effect of vertical vapor on the film thickness is dependent on the vapor’s orientation and position on the tube. Typically, is decreased by 25 % at z* = 0 and vg = 4.0 ms−1 and is increased by 20 % at z* = 0 and vg = 4.0 ms−1. The downward vapor enhances heat transfer on the top half of the tube’s periphery while weakening it on the bottom half, while the upward vapor contributes to heat transfer enhancement mainly in the detachment zone. Overall, the vertical vapor stream causes substantial redistributions of the heat transfer coefficient, velocity vector, and liquid film thickness in three distinct zones. Downward and upward vapor streams predominantly impact the upper and lower parts of the tube, respectively. Within the current velocity range, it is evident that vertical vapor streams consistently lead to an average enhancement in heat transfer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have