Abstract
Wind turbine blades are mainly made from E-glass fiber (GF) epoxy composites, because of their good ratio of strength to weight and costs. With the increase in blade length and tip speed, the problem of leading edge erosion is becoming more severe, reducing annual energy production and raising maintenance cost. It was recently shown that nanodiamond-treated flax fiber (FFND) composites have significantly less erosion than GF composites and could be an alternative for GF in the turbine blade aeroshells. However, FFND alone might not be suitable for manufacturing turbine blades at the large scale of modern wind turbines. Here, we show that a hybrid composite with a thin layer of only 1.5 mm of FFND on a GF base, can achieve the same superior results as bulk material FFND composite. In addition, we show and explain why aramid fibers, that are known for impact resistance, do not perform well as erosion protection. Our research shows the great potential of this technology to be implemented as a low-cost, lightweight skin layer on the leading edge. Acting as damage-tolerant failsafe layer, negligible ∼0.04% extra weight of the FFND could increase the blade’s base erosion resistance by a factor of 60±20 compared to plain GF, expanding the repair window, reducing costs, and enhancing reliability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.