Facilely prepared heterogeneous Fenton catalyst Fe(Fe0.69Al0.31)2O4@C for catalytic wet peroxide oxidation of ciprofloxacin in batch and continuous reactor: Reaction intermediates and toxicity evaluation

Abstract

Listen

Translate article

Herein, by using a simple co-precipitation method Al-doped magnetite spinel nanoparticle encapsulated in the carbon matrix Fe(Fe0.69Al0.31)2O4@C was synthesised and its catalytic activity was examined as a heterogeneous Fenton catalyst towards the catalytic wet peroxide oxidation (CWPO) of antibiotic pollutant 20 ppm ciprofloxacin (CIP) in batch and continuous reactors. Under the optimized conditions, 0.5 g·L-1 Fe(Fe0.69Al0.31)2O4@C in batch reactor mineralized 51 % of CIP was achieved within 180 min at 50 °C and pH 3 by utilizing 1.2 mM or 4S H2O2 (S = stoichiometry; 47 mol H2O2:1 mol CIP) which is significantly less concentration compared to other heterogeneous Fenton catalysts. Impressive long-lasting catalytic activity was demonstrated in the up-flow fixed bed reactor, for 110 h with 44 % TOC removal and less than 1 ppm Fe leaching in the effluent water. Kinetic studies on the rate of decomposition of H2O2 revealed that Fe(Fe0.69Al0.31)2O4@C effectively decomposed the H2O2 like the homogeneous Fenton catalyst. The XPS results confirmed the influence of Al on iron ions in the magnetite structure through a substantial shift in higher binding energy for Fe3+ and introduced a more electropositive character on the Fe3+(δ+) that successively expedites the kinetically slow Fe3+ reduction reaction with H2O2 to produce HOO•. The π electrons of the graphitic carbon facilitate the electron transfer between the carbon matrix and Fe(Fe0.69Al0.31)2O4 nanoparticles to enhance the CIP degradation. The acute toxicity assessment studies validated the non-toxic nature of the effluent water obtained from batch and continuous reactors. A degradation pathway was proposed based on the eleven intermediate products identified using LC-HRMS analysis.