Facile synthesis of LiFePO4/Cu composite as enhanced cathode material for lithium-ion battery by a solid-state grinding method

Abstract

Lithium iron phosphate (LiFePO4, LFP) is a frequently utilized cathode material for lithium-ion batteries. However, its practical applications are constrained by its relatively low ionic and electronic conductivities. To address this issue, it is possible to utilize highly conductive metallic coatings to enhance the material's electronic conductivity. Herein, LiFePO4 with Cu composites (LFP/Cu) as cathode was synthesized by a simple solid-state process via one-step grinding in the presence of CuNO3 and ascorbic acid. The discharge capacity of the LFP/Cu cathode with 0.75 wt% Cu was found to be 160.9 mA h g−1 at 0.1 C, representing a close approximation of its theoretical capacity and a notable enhancement compared to pure LFP (145.9 mA h g−1). Furthermore, it demonstrates excellent stability with a capacity retention of 136.5 mA h g−1 after 100 cycles at 2 C, as well as good rate performance. The electrochemical impedance spectra demonstrate that the incorporation of copper results in a further reduction in the resistance of LFP/Cu compared to pure LFP. The incorporation of copper particles into lithium iron phosphate has been shown to enhance its electronic conductivity, thereby further enhancing its electrochemical performance. In this study, we present a facile and cost-effective room-temperature synthesis method for the preparation of LiFePO4/Cu composites with improved electrochemical properties. This work provides a promising avenue for the design of cathode materials in lithium-ion batteries.