Facile preparation of magnetic mesoporous MnFe2O4@SiO2−CTAB composites for Cr(VI) adsorption and reduction

Abstract

Chromium-contaminated water is regarded as one of the biggest threats to human health. In this study, a novel magnetic mesoporous MnFe2O4@SiO2−CTAB composite was prepared by a facile one-step modification method and applied to remove Cr(VI). X-ray diffraction, scanning electron microscopy, transmission electron microscopy, specific surface area, and vibrating sample magnetometer were used to characterize MnFe2O4@SiO2−CTAB composites. The morphology analysis showed that the composites displayed a core-shell structure. The outer shell was mesoporous silica with CTAB and the core was MnFe2O4 nanoparticles, which ensured the easy separation by an external magnetic field. The performance of MnFe2O4@SiO2−CTAB composites in Cr(VI) removal was far better than that of bare MnFe2O4 nanoparticles. There were two reasons for the effective removal of Cr(VI) by MnFe2O4@SiO2−CTAB composites: (1) mesoporous silica shell with abundant CTA+ significantly enhanced the Cr(VI) adsorption capacity of the composites; (2) a portion of Cr(VI) was reduced to less toxic Cr(III) by MnFe2O4, followed by Cr(III) immobilized on MnFe2O4@SiO2−CTAB composites, which had been demonstrated by X-ray photoelectron spectroscopy results. The adsorption of Cr(VI) onto MnFe2O4@SiO2−CTAB followed the Freundlich isotherm model and pseudo-second-order model. Tests on the regeneration and reuse of the composites were performed. The removal efficiency of Cr(VI) still retained 92.4% in the sixth cycle. MnFe2O4@SiO2−CTAB composites exhibited a great potential for the removal of Cr(VI) from water.