Abstract
Coppery heat sink with micro pores and Sub-millimeter channel has been fabricated by direct laser sintering on the back of the silicon mirror. To verify the heat dissipation capability of the fabricated heat sink, a Twyman-Green interferometer was employed to measure the thermal deformation of the silicon mirror radiated by a high power laser. It is shown that the thermal deformation of the mirror increases with the irradiating time and laser intensity. The heat balance can be achieved after several seconds of laser irradiation even when the net absorbed laser power density is up to 5.3 × 10(5) W/m(2). The time for reaching the heat balance also increases with the laser intensity. The maximum thermal deformation of the mirror is 0.65 µm if the net absorbed laser power density is 5.3 × 10(5) W/m(2).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
