Abstract
This study presents both numerical modeling and experimental fabrication of three different partial-reflection (PR) coatings each optimized for quantum cascade lasers (QCLs) that emit radiation in the mid-infrared range. A novel double-layer PR coating comprising silicon dioxide (SiO2) and silicon nitride (Si3N4) was proposed as a potential solution for compatibility with QCLs fabrication processes. Subsequently, the PR coating was compared with two well-known PR coatings: a single layer of aluminum oxide (Al2O3) and a single layer of yttrium oxide (Y2O3). The coatings were designed to reduce the reflectivity of the front laser mirror from 30% to approximately 13%. The thickness of the dielectric layers was optimized for lasers emitting at 4.4 μm, with applicability in the 2.5–6 μm range. The proposed double-layer coating achieved the desired reflectivity while reducing the total coating thickness by 120 nm. By using the presented coatings it will be possible to increase the optical power of Mid-Infrared QCLs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
