Fabrication of omniphobic PVDF membrane with SiO2–FeOOH hierarchical structures for robust membrane distillation

Abstract

Omniphobic membrane has been demonstrated as an effective strategy to mitigate membrane wetting and fouling risks in membrane distillation (MD) processes. In this work, novel omniphobic membranes with hierarchical re-entrant surface structure were fabricated. Firstly, the FeOOH nanorods were deposited on the polydopamine (PDA) pre-treated poly (vinylidene fluoride) PVDF membrane. After that, the SiO2 nanoparticles (NPs) were coated on the FeOOH nanorods via electrostatic attraction to form hierarchical structures. Finally, the fluorosilane was utilized to reduce the membrane surface free energy, contributing to PVDF based omniphobic membranes. The effects of reaction time, FeCl3·6H2O and SiO2 NPs concentrations on membrane properties, including membrane surface morphology, average pore size, contact angles (CAs), surface roughness and permeate flux, were investigated in detail. The resulting omniphobic membranes showed high CAs towards various tested liquids, such as 0.4 mM sodium dodecyl sulfate (SDS) solution (143.9 ± 0.8°), hexadecane (113.5 ± 3.2°) and mineral oil (132.5 ± 2.8°). This membrane exhibited outstanding performance in a continuous 50-h vacuum membrane distillation (VMD) process with a 10 wt% NaCl feed solution. Besides, the anti-oil-fouling properties were further assessed with a feed solution containing 200-ppm hexadecane and 3.5-wt% NaCl, the omniphobic membrane exhibited steady permeate flux of above 24.18 kg m−2 h−1 and a 99.99 % rejection rate during 50-h testing. Finally, the omniphobic membrane showed high anti-wetting properties by SDS/salt solution. This work introduces a new strategy for fabricating omniphobic membranes that shows significant potential for treating complex industrial wastewaters.