Abstract
Proper grounding between different ground planes in coplanar superconducting qubit circuits is important to avoid spurious resonances which increase decoherence. Here, the authors present a possible solution to suppress such undesired modes using superconducting aluminum air-bridges which have been fabricated on top of aluminum coplanar waveguide transmission lines. 3D electromagnetic simulations were done to guide the design of the air-bridges such that the input reflection (S11) of the bridges was kept at a minimum level. A fabrication method based on optical lithography techniques was developed and it resulted in air-bridges with a height of approximately 10 μm and lengths of up to 500 μm. The method can be generalized to arbitrary length air-bridge with heights even exceeding 15 μm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.