Abstract
Ferroelectric (Pb,Ba)TiO 3 (PBT) thin films have been fabricated by sol–gel technique using a barium modified lead titanate sol synthesized from lead acetate tri-hydrate, barium acetate and titanium (iv) butoxide. PBT thin films were deposited on platinum coated silicon and fused quartz substrates by spin coating. The crystal structure and morphology of the films are strongly influenced by the heat treatment performed to form crystalline PBT films. The deposited films possess good compositional homogeneity and thickness uniformity. The dielectric constant and the dissipation factor measured at 1 kHz at room temperature are found to be 118 and 0.015. The remanent polarization and coercive field values are estimated to be 12 μC/cm 2 and 65 kV/cm from the hysteresis studies. The films possess a very low leakage current of ∼10 −7 A/cm 2 as measured from I– V characteristics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.