Fabrication of Dimples by Jet-ECM of Zr-Based Bulk Metallic Glasses with NaCl-Ethylene Glycol Electrolyte.

Abstract

Zr-based bulk metallic glasses (BMGs) possess unique mechanical and biochemical properties, which have been widely noticed. Jet electrochemical machining (jet-ECM), characterized by a high-speed jet, is a non-contact subtractive method with a high resolution and a high material removal rate (MRR). Past work on the electropolishing of Zr-based BMGs has indicated the feasibility of the NaCl-Ethylene Glycol (EG) electrolyte. In this research, the jet-ECM of Zr-based BMGs in the NaCl-EG electrolyte was studied to explore the dissolving mechanisms and surface integrity according to the voltage, pulse-on time and effective voltage time. The diameter, depth and surface morphologies of dimples were evaluated. The results showed that using this alcohol-based electrolyte led to a desirable surface morphology. The diameter and depth of the dimples varied with the voltage and the effective voltage time in a significantly positive proportional manner. Additionally, cases based on multiple parameter sets exhibited different stray corrosion severity. Afterward, machining performance can be enhanced in the next stage by tuning machining parameters to obtain microscale dimples with better quality.