Abstract
In this work, dense Yttria stabilized zirconia (YSZ) ceramic was printed by vat photopolymerization. We first formulated a slurry with good ceramic particle dispersion and modified the sintering process of the printed part. We improved the dispersion of the yttria stabilized zirconia (YSZ) particles by mixing with dispersant before preparing the slurry. After printing with the slurry, the printed part was sintered under a pressure of 20 KPa. No pores could be observed in the cross-section view indicating we successfully fabricated ultra-dense YSZ ceramic by vat polymerization and high-pressure sintering process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
