Abstract

We conducted a simple solution-based method to fabricate Bi2S3 nanowire thin film solar cells by spin coating with varying sulfur-to-bismuth ratios. Spherical nanoparticles were observed in the thin film with low-concentration sulfur solution, with these nanoparticles gradually changing to nanorods. Finally, nanowires of Bi2S3 were observed in the thin film with a high sulfur concentration in solution. The band gap gradually decreased with the increase in sulfur concentration. The solar cell performance was significantly improved with the nanowire structure. During film fabrication, sulfur vacancy defects appeared primarily because of high annealing temperatures. These defects were somewhat reduced by the high concentration of sulfur in the solution, supported by the energy-dispersive x-ray spectroscopy (EDS) results. The elemental chemical composition of Bi2S3 material showed an increase in the sulfur-to-bismuth ratio, reaching saturation at almost 0.9. In this work, we systematically observed the effect on the optical properties, surface morphology, and photovoltaic properties by changing the concentration of sulfur in the precursor. The nanowire structure with a high concentration of sulfur in the solution is a promising way to improve the Bi2S3 thin film solar cell.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call