Abstract
We have proposed a novel micro-tubular solid oxide fuel cell (SOFC) design with an inert support and an integrated current collector for the inner electrode to improve current collection efficiency as well as reduction–oxidation stability of the cell. In this work, a micro-tubular SOFC based on the proposed design was fabricated using scandia-stabilized zirconia (ScSZ) as electrolyte owing to its high ionic conductivity over a wide range of temperatures. Yttria-stabilized zirconia (YSZ), Ni, Ni-ScSZ, strontium-doped lanthanum manganite (LSM)–ScSZ, and LSM were used as the inert support, anode current collector, anode, cathode, and cathode current collector, respectively. The electrochemical performance of the fabricated cell was evaluated at temperatures between 600 and 850°C. Because of the lower ohmic resistance across its components, the cell exhibited good power generation performance at high and intermediate temperatures. Additionally, we confirmed stable operation of the micro-tubular SOFC for over 60 h at 750°C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
