Abstract
Sub-micron-gate Pt/SrBi2Ta2O9/Hf-Al-O/Si ferroelectric-gate field-effect transistors (FeFETs) were successfully fabricated using electron-beam lithography, metal hard mask technique and dry etching. Scanning electron microscopy measurements revealed that the gate length of a fabricated FeFET was 0.56 µm. Drain current versus gate voltage curves showed steep switching and a memory window of 0.93 V when the applied gate voltage range was 1 ± 5 V. Excellent endurance characteristics were observed up to 108 program/erase cycles, indicating that the FeFETs are suitable for use in NAND flash memory applications. Retention measurements showed that the drain current ON/OFF ratio (104) did not undergo any significant change up to 105 s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
