Abstract

Concerning the environmental hazards owing to the chemical-based synthesis of silver nanoparticles (AgNPs), this study aimed to investigate the possibility of synthesizing AgNPs on the surface of polyacrylonitrile (PAN) nanofibers utilizing biomacromolecule lignin. SEM observations revealed that the average diameters of the produced nanofibers were slightly increased from ~512 nm to ~673 nm due to several factors like-swellings that happened during the salt treatment process, surface-bound lignin, and the presence of AgNPs. The presence of AgNPs was validated by transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) analysis. The amount of synthesized AgNPs on PAN nanofibers was found to be dependent on both precursor silver salt and reductant lignin concentration. Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectra confirm the presence of lignin on PAN nanofibers. Although the X-ray diffraction pattern did not show any AgNPs band, the reduced intensity of the stabilized PAN characteristics bands at 2θ = 17.28° and 29.38° demonstrated some misalignment of PAN polymeric chains. The water contact angle (WCA) of hydrophobic PAN nanofibers was reduced from 112.6 ± 4.16° to 21.4 ± 5.03° for the maximum AgNPs coated specimen. The prepared membranes exhibited low thermal stability and good swelling capacity up to 20.1 ± 0.92 g/g and 18.05 ± 0.68 g/g in distilled water and 0.9 wt% NaCl solution, respectively. Coated lignin imparts antioxidant activity up to 78.37 ± 0.12% at 12 h of incubation. The resultant nanofibrous membranes showed a proportional increase in antibacterial efficacy with the rise in AgNPs loading against both Gram-positive S. aureus and Gram-negative E. coli bacterial strains by disc diffusion test (AATCC 147-1998). Halos for maximum AgNPs loading was calculated to 18.89 ± 0.15 mm for S. aureus and 21.38 ± 0.17 mm for E. coli. An initial burst release of silver elements within 24 h was observed in the inductively coupled plasma-atomic emission spectrometry (ICP-AES) test, and the release amounts were proportionally expansive with the increase in Ag contents. Our results demonstrated that such types of composite nanofibers have a strong potential to be used in biomedicine.

Highlights

  • Electrospinning is a simple, cheap, and versatile technique for producing multifunctional nanofibers from a wide variety of materials that include polymers, polymer blends, sol-gels, ceramics, composites, etc. [1,2]

  • We reported an antibacterial electrospun PAN nanofibrous membrane, which was surface coated with lignin synthesized AgNPs

  • transmission electron microscope (TEM) micrographs and ICP spectrometry revealed that the amount of formed

Read more

Summary

Introduction

Electrospinning is a simple, cheap, and versatile technique for producing multifunctional nanofibers from a wide variety of materials that include polymers, polymer blends, sol-gels, ceramics, composites, etc. [1,2]. Nanofibers are defined as structures with a diameter of less than 1 μm by the U.S textile industry and Japanese and Korean strategic research initiatives, which is different from the National Science Foundation definition of nanotechnology, where the structure less than 0.1 μm are classified as nanomaterials [3]. Nanowebs from electrospun nanofibers have remarkable uniqueness, such as a large surface-to-volume ratio and pore sizes in the nano range. Modifying nanofibers’ functionality is much easier because of the flexibility of incorporating different additives on the solution during the electrospinning process [1,2,4,5]. Electrospun nanofibers’ functionality can be enhanced by surface anchoring of various functional elements. The exclusive properties and multi-functionality of these nanowebs make them extremely interesting and appealing for applications in multiple areas, including biotechnology and nanotechnology, with particular applications in areas like membranes/filtration, textiles, sensors, medical scaffolds, etc. The exclusive properties and multi-functionality of these nanowebs make them extremely interesting and appealing for applications in multiple areas, including biotechnology and nanotechnology, with particular applications in areas like membranes/filtration, textiles, sensors, medical scaffolds, etc. [6,7,8,9,10,11]

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call