Abstract
The arsenic extraction from the arsenic-containing cobalt and nickel slag, which came from the purification process of zinc sulfate solution in a zinc smelting factory, was investigated. The alkaline leaching method was proposed according to the mode of occurrence of arsenic in the slag and its amphoteric characteristic. The leaching experiments were conducted in the alkaline aqueous medium, with bubbling of oxygen into the solution, and the optimal conditions for leaching arsenic were determined. The results showed that the extraction rate of arsenic was maximized at 99.10% under the optimal conditions of temperature 140 °C, NaOH concentration 150 g/L, oxygen partial pressure 0.5 MPa, and a liquid-to-solid ratio 5:1. Based on the solubilities of As2O5, ZnO and PbO in NaOH solution at 25 °C, a method for the separation of As in the form of sodium arsenate salt from the arsenic-rich leachate via cooling crystallization was established, and the reaction medium could be fully recycled. The crystallization rate was confirmed to reach 88.9% (calculated on the basis of Na3AsO4) upon a direct cooling of the hot leachate down to room temperature. On the basis of redox potentials, the sodium arsenate solution could be further reduced by sulfur dioxide (SO2) gas to arsenite, at a reduction yield of 92% under the suitable conditions. Arsenic trioxide with regular octahedron shape could be prepared successfully from the reduced solution, and further recycled to the purification process to purify the zinc sulfate solution. Also, sodium arsenite solution obtained after the reduction of arsenate could be directly used to purify the zinc sulfate solution. Therefore, the technical scheme of alkaline leaching with pressured oxygen, cooling crystallization, arsenate reduction by SO2 gas, and arsenic trioxide preparation, provides an attractive approach to realize the resource utilization of arsenic-containing cobalt and nickel slag.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transactions of Nonferrous Metals Society of China
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
