Exploring the Synergy of Integration: Assessing the Performance of Hydraulic Storage and Solar Power Integration in Kirkuk city

Abstract

This research investigates the performance of integrated system combining of hydraulic storage and solar power in Iraq. A photovoltaic-water pumping system was designed to store solar energy in the form of water in tank at a height of 6 mm. The study evaluates the influence of solar radiation level and pumping time in determining the amount of energy stored. During clear days in March, 175 minutes was taken to pump a total of 3400 liters of water in the case of the fixed PV panel, while when using the tracker, the time is reduced to 165 minutes for filling the tank with the same quantity of water due to the increase in the pumping capacity in the case of the tracker. During a cloudy day in the same month, the same quantity of water was pumped in 230 minutes. The stored water was then utilized to generate electricity, with varying flow rates based on the desired power output .The highest produced power was obtained by 42.9 W at a 42 lit / sec water flow rate, and the lowest power obtained by 23.2 W at a minimum water flow rate of 25 lit / sec. Moreover, the system's cost-effectiveness is enhanced by employing a direct current pump which can be used without the need for the inverter or batteries. These findings provide good understanding for the integrating of the hydraulic storage and solar power systems, offering potential solutions for sustainable energy generation in Iraq.