Abstract
We describe a combination of Confocal Raman Imaging (CRI) and quantitative image analysis to characterise biocomposite material microstructures. Both techniques offer lateral resolutions close to 1.3μm and axial resolution of 13μm, while simplifying sample preparation to hand-cutting without any surface preparation. Extruded and injected polycaprolactone/hemp fibre composites were used as demonstration biocomposites. A green macrobisphenol additive (bis-O-dihydroferuloyl-1,4-butanediol) was also used as a chemical probe to characterise the dispersion efficiency of additives, with a detection threshold of 2.3wt% above which very local heterogeneity can be determined by this technique. CRI provided microstructure information for the entire binary structure formed by the fibre network. The fibre dispersion and orientation depend on their location in the matrix, and the specific surface of the fibres increases with the fibre content as aggregates start to develop. The technique also highlighted a possible core-skin effect in the injected composite.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
