Abstract

In this study, the viability of applying cork and montmorillonite clay modified with ionic liquid as biosorbents in the rotating-disk sorptive extraction technique was investigated. Specifically, this was aimed at the determination of methyl paraben, ethyl paraben, propyl paraben, and isobutyl paraben, with separation/determination by high-performance liquid chromatography coupled with mass spectrometry. The optimization of the method for both biosorbents was performed using multivariate procedures. The extraction efficiencies for the target compounds in aqueous matrices were compared to those obtained using the commercial sorbent Octadecil Silano-C18. The optimum extraction conditions for both natural sorbents were the use of an ammonia solution (pH 10) as desorption solvent and an extraction time of 30min. The proposed methods show limits of quantification of 0.8μg/L for cork, 3.0μg/L for montmorillonite clay and 6.0μg/L for Octadecil Silano-C18. The relative recoveries from river water and tap water samples ranged from 80.3 to 118.7% and 80.0 to 119.9% for cork and montmorillonite clay modified with ionic liquid, respectively. Relative standard deviations were obtained for intra- and interday precisions of <15% and <19% for cork and <19% and <17% for montmorillonite clay modified with ionic liquid.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.