Abstract

The aim of this work was to evaluate the technical feasibility of producing potable water from simulated seawater by integrating a membrane distillation module with a solar still. The relatively hot brine in the solar still was used as a feed to the membrane module. The synergistic action of the solar still and the membrane module in the production of potable water was quantified. For this purpose, two types of experiment were conducted, indoor experiments and outdoor experiments. The sensitivity of the permeate flux to the brine temperature, flow rate, salt concentration and solar irradiation were all investigated. Overall, the flux of water from the solar still was no more than 20% of the total flux. The brine temperature significantly affected the flux of both the solar still and the membrane module, while the effect of salt concentration was marginal. The effect of these process parameters was more noticeable in the membrane module than in the solar still.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call