Abstract
Abstract Reasonable amounts of fresh water can be produced via inexpensive and sturdy solar stills in places that are exposed to solar radiation and have a brackish water. This work intends to analyze the many studies on factors that affect the performance of solar stills. The results showed that the distillation productivity of solar stills are significantly influenced by ambient conditions (e.g., ambient temperature, insolation, wind velocity, dust and cloud cover), operating conditions (e.g., depth of water, various dyes, salt concentration and inlet temperature of water), and design conditions (e.g., different passive/active designs of solar stills, slope of the cover, materials selection, storing materials, reflectors, insulation, gap distance and sun tracking system). It was also determined that the performance of solar stills was improved through the increase in solar radiation, ambient air temperature, wind speed, and water absorptivity. This also rings through with the decrease in water depth, thickness of cover, gap distance between water surface and condensing cover. It was also determined that both internal and external reflectors are capable of increasing the amount of absorbed solar radiation on the basin liner. The potential output of a basin type still can potentially increase to almost 70–100%. On top of this, the utilization of a sun tracking system was determined to be way more effective in improving the performance of solar still. This translate to the fact that solar stills being able to produce potable water at a very economical cost. Due to the existence of different methods of cost estimation, it is not possible to determine a universal, comparable price per technology; the cost per liter of distilled water obtained from the basin type solar still is ranged from 0.035 to 0.074$/liter. This study proved the fact that distillation productivity of solar still is heavily influenced by climatic, operational, and design parameters. Its output can be further improved via operational and design conditions, as climatic conditions are beyond our control.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.