Experimental study on the separation performance of a novel gas–liquid separator

Abstract

• A dynamic gas–liquid separator called high-gravity cyclone separator (HGCS) has been designed. • A high-gravity environment is created by the strengthened centrifugal force in the rotary drum. • The performance, including the efficiency and pressure drop, is experimentally investigated. • The effects of the operating conditions and drum structure parameters are evaluated. A novel two-stage dynamic separator called high-gravity cyclone separator (HGCS) has been designed for gas–liquid separation. It is mainly composed of a cyclone chamber and rotary drum. In this study, its performance, including the separation efficiency and pressure drop, is experimentally investigated, and the effects of the operating conditions and drum parameters are evaluated. For droplets with a mean diameter of 7 μm, the results indicate that the optimal gas inlet velocity and high-gravity factor are 12 m/s and 59.4, respectively, and the separation efficiency reaches 98 %. The effect of liquid concentration is sensitive to the high-gravity factor. At a liquid concentration of 57 g/m 3 , the maximum efficiency will be 98.75 % when increasing the high-gravity factor to 85.6. Furthermore, a smaller radial height is preferable when the gas inlet velocity is greater than 12 m/s, and a better separation efficiency can be obtained by increasing the drum length to 190 mm. However, when the length is 235 mm, the efficiency will be poor because of the Kelvin–Helmholtz and Rayleigh–Taylor instabilities. Compared with the predominant roles of gas inlet velocity, drum length and radial height in pressure drop, the effects of liquid concentration and high-gravity factor are small.