Abstract

The Yushen mining area contains thin bedrock and a shallow buried coal seam, where JingLe group Hipparion clay and Lishi loess serve as a high-quality cement insulation cover. This study investigates the properties of the clay layer to determine the effect of the clay aquiclude on the mining water variation and fracture characteristics. Unloading hydraulic jack experiments were performed to test the physical and mechanical properties of the clay layer and the structure was analyzed in detail. The experimental results show that mining affects the soil cracks, leading to crack opening and subsequent bridging. The permeability coefficient of the soil layer initially increases with increased unloading and then decreases. A theoretical model is developed to determine the recovery mechanism of the clay layer water insulation based on the spatial movement of the clay. The results indicate the formation of a waterproof cover type of coal mud protection. Design methods are proposed to optimize the coal pillar size. Mining damage leads to the formation of a mud-covered bridge belt, which can be designed to appropriately reduce the protective layer thickness. The model is applied to the Hao Jialiang 2301 working face. The results provide important insight on the variation characteristics of the mining water insulation in clay layers and an important reference for accurately calculating the size parameters of waterproof protective coal pillars under mud-cap conditions to increase the upper mining limit of the working face.

Highlights

  • Coal resources and mines are abundant in Yulin-Shenmu (Shanxi Province, China). e mining area contains a large amount of shallow buried coal seams (

  • Cohesive soil layers above a coal seam offer good water resistance and can form a high-quality cement barrier cap that plays an important role in protecting the surface aquifer, which differs from common loose sand layers in terms of water conservation and coal mining practices

  • Li et al described the mining-induced variation characteristics of loess from the Lishi Formation and laterite of the Baode Formation after large-scale coal mining operations in northern Shaanxi [24], and Xu proposed the concept of an effective water barrier thickness [25]

Read more

Summary

Introduction

Coal resources and mines are abundant in Yulin-Shenmu (Shanxi Province, China). e mining area contains a large amount of shallow buried coal seams (

Physical and Mechanical Property Tests
Mining-Induced Fluid-Solid Coupling Experiments
Water Conservation Mining in Mud-Capped Coal Seams
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.