Abstract
Ni-based single-crystal superalloys are normally prepared by directional solidification. Due to different solidification sequences, Ni-based single-crystal superalloys exhibit a typical dendritic arm structure, and the element segregation in the dendritic arm can affect the high temperature mechanical properties of the alloy. Solid solution treatment has a certain extent to reduce the inter-dendritic and dendritic arm between the concentrations of the elements, thereby changing the alloy micro-nano view parameters to improve the high temperature mechanical properties of the alloy. In this study, nanoindentation experiments were carried out on the inter-dendritic and dendritic arm of the cast and solid solution samples. The micromechanical parameters were calculated. The amounts of changes in elemental concentration were discussed with the results of the energy dispersive spectroscopy and electron probe microanalysis, so as to analyse the relationship between the micromechanical parameters and the changes in elemental concentration. The results show that solid solution treatment has a significant impact on the elastic modulus, with an increase of 114.7% of the inter-dendritic region and an increase of 142.7% of the dendritic arm. However, solid solution treatment has little effect on the hardness, with no significant change in the hardness of the inter-dendritic region and an increase of 43.86% of the dendritic arm. Solid solution treatment has a more significant effect on improving the segregation behavior of Al and Co elements, with the segregation coefficients of Al and Co elements in the inter-dendritic region decreasing and increasing by 36% and 19%, and the segregation coefficients of Al and Co elements in the dendritic arm region decreasing and increasing by 29% and 34%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.