Abstract
AbstractDue to the outstanding mechanical properties of the reactive powder concrete (RPC), it has attracted a great deal of attention. In which, incorporating fibers can improve its behavior and properties. The main objectives of this study were to consider different mixing methods and the effect of fiber content and type on the mechanical properties of RPC. The best mix proportion was selected for the final tests among 13 initial mix designs based on the 7‐day compressive strength and flow value of the fresh concrete. Different macro and microfibers (including steel, polyvinyl alcohol, glass, carbon, and basalt fibers) with volume fractions of 0.5% and 1.5% were added to the final RPC mix by two different mixing methods, and mechanical properties such as compressive, tensile, and flexural strengths and energy absorption capability were investigated. Based on the results of experiments, the addition of 1.5% hybrid (macro and micro) steel fibers had the most positive effect on increasing the mechanical properties of RPC compared to other fibers. The hybrid fibers increased the compressive, tensile, and flexural strengths and flexural toughness of the specimens by 42.5%, 26.9%, 87.6%, and 396%, respectively. According to the results, the addition of 0.5% fibers to RPC did not significantly enhance the mechanical properties of the concrete.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call