Abstract
The effect of microstructure on shear strength of saturated marine clays was investigated by conducting a series of consolidated-drained (CD), consolidated-undrained (CU) triaxial shear tests and mercury intrusion porosimetry (MIP) tests on undisturbed and reconstitute specimens. The valuable findings from the experimental study are follows: (1) The shear strength of undisturbed specimens is lower than that of corresponding reconstituted specimens due to larger void ratio at the same confining pressure. However, undisturbed specimens have higher strength than reconstituted specimens when their void ratios are the same. (2) The main reason for the lower shear strength of reconstituted specimens with the same void ratio as undisturbed specimens is that more volume of inter-aggregate pores exists in the reconstituted specimens according to the MIP test results. And the difference in shear strength between undisturbed and reconstituted specimens is mainly caused by the difference in soil fabric. (3) The shear test results dealt with a reference void ratio, as a fabric index, show that there is a unique linear relation between strength and void ratio at failure to the reference void ratio. Moreover, the linear relation is suitable for other marine clays from the literature. Therefore, the reference void ratio can be used as a soil fabric index to normalize the strength characteristics of marine soft clays.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.