Load–displacement behavior of helical pile using Frustum Confining vessel (FCV) and full-scale testing in Babolsar sand

Abstract

Nowadays, the use of deep foundations in various civil engineering projects, especially in marine and coastal structures, has been increasing. One type of deep foundations are helical pile foundations, which have gained significant attention in recent decades. This research investigates the load–displacement behavior of different helical pile configurations regarding geometry, i.e., helix diameter and spacing ratio (S/D) in two different soil densities under pullout and compressive loading conditions via the FCV-AUT device. Babolsar sand from the southern coast of the Caspian Sea was utilized for advancing this study. Additionally, four full-scale pile tests were conducted on the Caspian Sea coast under both grouted and non-grouted conditions for pullout and compressive loading. The results indicate that increasing the helix diameter, soil density, and S/D ratio enhances the compressive load-bearing capacity. However, in tensile loading, the ultimate load decreases with an increase in the spacing ratio. Furthermore, the grouting process in the three-helix pile exhibits better performance compared to the two-helix pile, potentially increasing the pile capacity up to 30%. In conclusion, the results obtained from the FCV device, utilizing scale theory, have been generalized to the large-scale pile test results in the field, are representative of in agreement and compatible.