Abstract
This study investigated the potential use of microbially induced calcite precipitation (MICP) to prevent seepage in shield tunnels with the aim of decarbonizing tunnel engineering. An apparatus was developed to conduct scale model tests to evaluate the effectiveness of using MICP for shield tunnel seepage control. To understand the MICP process and its induced change in seepage flow rate, a series of 1-g physical model tests were conducted using the designed apparatus to investigate the effect of injection methods, grouting pressure, and calcium carbonate (CaCO3) content produced as well as its distribution on the reduction of seepage flow rate for thephysical tunnel model with different backfills behind its linings. The variation law of the pore pressure near grouting hole of the tunnel segment was also revealed. Results indicated that when the amount of CaCO3 precipitation in sand-grout mixtures was 10.53% and 10.12%, water seepage flow rate for thephysical tunnel modelwith Fujian- and coarse-sand-grout backfill respectively reduced by 94.3% and 73.8% of their respective initial values, and S-wave velocity increased by 89.6% and 84.9% for Fujian- and coarse-sand-grout mixture, respectively. The grouting pressure needed to be controlled within a certain range to prevent the unstable CaCO3 precipitates from being washed away. The testing results also showed that the one-phase injection method was more effective in controlling seepage water into a shield tunnel. Based on the findings of the scale model tests, some vital considerations and suggestions were presented on the use of MICP approaches for shield tunnel seepage control.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call