Abstract

Abstract Pervious concrete is a unique and effective material used to tackle important environmental problems, to maintain green, sustainable growth, and to reduce storm water runoff and pollutants. Clogging of pervious concrete is an important potential issue in serviceability, considered one of the primary limitations of pervious concrete systems. The sediment deposition pattern of pervious concrete was determined using three clogging materials: clay, sand, and clayey silty sand. The clogged specimens were cleaned by pressure washing, vacuuming, and a combined method. In total, ten clogging and cleaning cycles were carried out on each sample to evaluate the draining capacity of the pervious concrete. The clogging test was assessed by measuring the infiltration rate during clogging and after cleaning, for each cycle. The experiment results showed that a reduction in permeability due to different types of sedimentation material as well as recovery in permeability was achieved after applying various cleaning methods.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.