Abstract
AbstractBACKGROUNDRapeseed straw is an agricultural residue increasingly produced in recent years due to a growing interest in biodiesel production. In the present study, rapeseed straw pretreated by liquid hot water was tested as a substrate to optimize ethanol production by simultaneous saccharification and fermentation (SSF). Temperature, time, substrate loading and cellulase charge were selected as operation variables and modified according to a three‐level four‐variable experimental design. Ethanol concentration, ethanol yield and volumetric productivity were monitored and adjusted to a quadratic model using response surface methodology.RESULTSOptimal SSF conditions, based on the mathematical model in terms of ethanol yield and concentration, were found to be 40°C, 71 h, 10% substrate loading, and 40 FPU g−1 substrate. The resulting ethanol concentration was 23 g L−1, which corresponds to 69% ethanol yield.CONCLUSIONLiquid hot water is an effective pretreatment that increased the cellulose concentration of rapeseed straw, making it a good substrate for SSF, with a maximum yield of 0.12 g ethanol g–1 dry straw. The novel combination of hydrothermal pretreatment and SSF configuration results in yields comparable yields with those previously reported, and has additional advantages, e.g. no chemicals use and high solid concentration operation. © 2013 Society of Chemical Industry
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Chemical Technology & Biotechnology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.