Abstract
In our previous study, a new centerless grinding method using surface grinder was proposed. In this method, a compact unit consisting mainly of an ultrasonic elliptic-vibration shoe, a blade, and their respective holders is installed on the worktable of a multipurpose surface grinder to conduct tangential-feed centerless grinding operations. For the complete establishment of this new method, firstly in this paper workpiece rotational speed control tests were carried out to make sure that the workpiece rotational speed is exactly controlled by the elliptic vibration of shoe to achieve high-precision centerless grinding. Then, the effects of the process parameters such as the worktable feed rate, the stock removal and the workpiece rotational speed on the workpiece roundness were clarified experimentally. The obtained results showed that (1) The workpiece rotational speed can be controlled exactly by the shoe ultrasonic vibration, (2) The roundness is improved with the increases in the voltage applied and the stock removal, but the decrease in the worktable feed rate; The best roundness obtained was 0.84m.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
