Abstract
Seeding high power fiber amplifier employing multi-tone fiber laser is an effective approach to suppress stimulated Brillouin scattering (SBS). In this paper, a two-stage 1064 nm high power fiber amplification system was set up. Single-, two- and three-tone fiber lasers were employed. SBS threshold powers and maximum output powers of the multi-tone cases are enhanced compared with the single-tone case. The multi-tone amplifiers also show comparable optical-to-optical efficiency to the single-tone amplifier. To demonstrate and validate coherence property of the two multi-tone fiber amplifiers, the output laser beams of the amplifiers were self-interfered in our self-made coherent beam combining system. The laser beams of the multi-tone cases showed good coherence property comparable to the single-tone case, which implied that the high power output laser light of the multi-tone fiber amplifiers could be used for coherent beam combining.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.