Experimental study of rotor blades vibration and noise in multistage high pressure compressor and their relevance

Abstract

Rotor blades fault of aeroengine compressor is mostly caused by mechanical and aerodynamic excitation. And the excitation factor of high intensity sound wave to rotor blades should not be ignored. Experimental researches are conducted on a multistage high pressure compressor. When high level vibration occurs on the first stage of rotor blades, the noise spectrum presents typical characteristic for discrete multi-tone in the compressor. The amplitude of blade vibration displacement and the sound pressure level of characteristic frequency noise increases and decreases simultaneously and reaches the maximum value at the same time. This frequency merely occur on a certain speed range and is locked in a specific range which presents no variation with the rotating speed. When high level vibration occurs on the first stage of rotor blades, the noise spectrum presents a sharp peak and the propagation state of the characteristic frequency is a helix structure in the compressor. It can be confirmed that acoustic resonance occurs in the multistage compressor. The acoustic resonance frequency and its side band frequencies are generated by modulation of a rotating noise source at the rotor speed which is the excitation source of the rotor blades vibration.