Abstract

We experimentally study the heat transfer and flow characteristics of thermal convection in a rectangular cell with built-in lattice channels. The working fluid used is water with a Prandtl number of 5.5, and the Rayleigh number ranges from 2.5×108 to 6.9×109. Three proposed models with different channel sizes and positions and the classical Rayleigh–Bénard convection (RBC) are studied, and the heat transfer and flow structure characteristics are analyzed using measured temperature signals. The first model included two short channels placed near the top and bottom plates, which disrupt the mixing zone and enhance heat transport. The second model involves relatively long channels positioned at the center of the cell, but far from the thermal boundary layer, resulting in a more coherent bulk flow that also enhances heat transport. For these two configurations, the heat transfer enhancement rate is approximately 20% compared to standard RBC. The third model uses long lattice channels that almost touches the top and bottom plates. This configuration results in a maximum heat transfer enhancement of about 138% due to the organized boundary layer and bulk flow induced by lattice channels. The presence of channels also results in a two-order smaller standard deviation of temperature, indicating a significant reduction in fluctuations. However, the average temperatures in the center of some channels were significantly different from the mean system temperature, suggesting the existence of cold or hot fluid flow through the channel. Our experimental results show that the inclusion of channels with appropriate lengths and positions can effectively regulate the flow near the boundary layer and in the bulk, leading to significant enhancements in heat transfer.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call