Abstract
Multi-effect distillation is an important principle in desalination technology, in which the thin film evaporation of sea water takes place at the outer surface of bundle of tubes, normally arranged in horizontal. Heat of condensation inside the tube is transferred to the falling water film by conduction, thereafter convective evaporation of film takes place. Heat transfer on the outside is unpredictable due to the uncertainty in nature of film, film thickness, film dryout, etc. and film coefficient is considerably less compared to inside. Thermal spray coating on metallic surface with molten metal particles create porous surface which enhances heat transfer due to higher turbulence and nucleation sites, if sufficient temperature difference available. This paper discusses the experimental studies carried out on a 3 × 5 bundle of 25.4 mm ∅ Al horizontal tubes with thermal spray coating of aluminum. Influences on temperature profile, heat transfer coefficient, mass evaporation, etc. are studied. A comparison of sea water and fresh water is carried out for the performance of the system. The experimental setup is established at IIT Madras, Chennai, India.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
