Abstract
CO2-responsive foam (CRF) is a highly promising candidate for CO2-enhanced oil recovery (CO2-EOR) because it displays higher stability than the surfactant-stabilized foam owing to the formation of robust wormlike micelles (WLMs) upon exposure to CO2. In this work, the nanoparticle-enhanced CO2-responsive foam (NECRF) was properly prepared using lauryl ether sulfate sodium (LES)/diethylenetriamine/nano-SiO2, and its interfacial properties and EOR potential were experimentally and numerically assessed, aiming to explore the feasibility and effectiveness of NECRF as a novel CO2-EOR technique. It was found that the interfacial expansion elastic modulus increased 6-fold after CO2 stimulation. The modulus continued to increase with the introduction of nano-SiO2 owing to the pronounced synergistic effect of WLMs and nanoparticles. In addition to increasing the viscosity of the foaming liquid, WLMs and nano-SiO2 enhanced the shearing resistance of the NECRF as well. Calculations demonstrated that both the coarsening rate and the size distribution uniformity coefficient of NECRF were markedly lower than that of the LES foam, which subsequently inhibited NECRF decay and greatly improved its dynamic stability. Besides, molecular dynamics simulation revealed that adding inorganic salts to NECRF could notably enhance the foaming performance due to the intensified hydration of surfactant head groups and reduced binding energy of neighboring molecules. Nuclear magnetic resonance-assisted core flooding experiments validated the exceptional capacity of NECRF to sweep the low-permeability region and improve the conformance profile. Overall, these findings may provide valuable insights into the development and application of novel materials and strategies for the CO2-EOR.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.