Abstract
In order to provide efficient thermal management for high-power electronics while keeping the light weight and compact physical size of the devices, a thin aluminum vapor chamber using micro-grooved wick with reentrant cavity array (MGRA) was developed. The MGRA was featured with high-aspect ratio micro-grooves for capillary capacity enhancement and reentrant cavities for phase change facilitation. The start-up performance, thermal resistance, temperature distribution of the vapor chamber, as well as the effects of heat load, operational orientation and cooling flow rate on its performance were investigated. The MGRA vapor chamber yielded a fast temperature response and low start-up heat load. Besides, the thermal resistance remained stable from 0.055 to 0.074 K/W. It also showed a good anti-gravity performance, with the minimum thermal resistance reached at the inclination of 30°. In addition, the cooling flow rate had little effect on the thermal performance of the chamber, despite the decrease of wall temperature with increase of flow rate. In order to justify the advantage of employing MGRA as enhanced wick, the MGRA vapor chamber was compared with others reported in literatures. The results indicated that this vapor chamber was well suited for thermal management of compact high-power electronics under various operational conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.